TSP Cast aluminum
Polishing
For
the ultimate in appearance and corrosion protection!
Performer 455 intake manifold, shown with the optional TSP- E100 intake manifold shield installed.
Look for the great deal on polishing and shield installation below!
Description and Benefits
At TSP, we are always looking for ways to make a good thing better, or to preserve the pretty parts that leave here, so their owner can continue to enjoy them, long after the purchase is complete.
Cast Aluminum has always been a problem. It is a porous material, so it literally "sucks in" any kind of contamination, which results in an almost impossible to clean stain, which typically can only be removed by glass bead blasting the part in question. And if that part is your intake manifold, that is not such an easy task.
For the last several years, we have been working closely with local vendors, attempting to come up with a solution to this problem, and we are very excited about how this process has evolved. We have developed a proprietary vibratory polishing process that creates the shiny parts that you see throughout this website, and we are offering this service to the rest of our Buick friends now.
And since there isn't any kind of material painted, or bonded to the aluminum, there is nothing to come off, or discolor.... ever!
Beyond just the obvious appearance enhancement, polishing your cast aluminum parts with out unique service will protect you investment. Gone are the days of putting rubber gloves on before you touch your intake manifold, or getting distraught when you spill gas on it during a jet change. This process closes the pores of the material up, and grease, oil, fuel and dirt simply wipe right off. Anyone who has seen this in person.. wants it done for their parts!
We offer quick turn around time, typically, it takes no longer than a week to get you parts on their way back to you, after we receive them.
This
service is available on:
 |
STg
1 or 2 alum heads (pair)
bare
castings or Complete............$225.00 |
|
Intakes
add
our custom splash shield for only
$35.00
INSTALLED! ....
$125.00 |
|
Timing
Cover/water Pump assembly
..$ 90.00 |
|
Rear
end covers
...$
65.00 |
|
Valve
Covers
TA
Satin or Custom Fabricated
$ 95.00 |
|
Brackets
and misc
Aluminum
Alt/AC and PS,
water
necks ........
...$
call |
Motor
package Prices:
Package 1
Includes intake, timing cover /Water pump.... $ 200.00
(save $15.00)
Package 2
.. above, + valve covers
. $ 285.00 (save $25.00)
Package 3
. Above, + Aluminum Heads
.. $500.00 (Save $30.00)
Add
Alt/AC and PS Brackets and water neck to any package for Free!!!
Add Intake oil shield to any package for only $30.00
Prices are for polishing
only
add $45.00 per part for clean up, if required. All used parts will
require bead blasting. Full Manifold porting and oil pump porting and building
available. Ask for details!